Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.236.212.116) for this check.

Country:


Veritas® PM-V11™ Bench Chisels

Veritas® PM-V11™ Bench Chisels
  • The metal's micro-structure makes it extremely durable and wear-resistant, so it can withstand the impact of heavy chopping cuts even at bevel angles as low as 20°
  • Edge will typically last at least twice as long in use as an A2 blade before it needs sharpening
  • Despite its toughness, it is as easy to sharpen as A2 steel using common abrasive media such as water stones
  • Tapered from shoulder to tip for strength and rigidity
  • Center of gravity is at or below tang/socket connection; tang has flats to prevent handle from rotating
  • Ferrule turned from a solid blank, seats directly onto blade shoulder
  • Maple handle kiln-baked at high temperature to eliminate nearly all moisture content and to caramelize natural sugars in wood (helps seal it)
  • Handle is contoured to fit hand, with shallow flats parallel to blade back to provide tactile cues for finger placement
  • End is domed to resist chipping from glancing mallet blows
  • Blades range from 3-5/8" to 5-1/8" long
  • The3/8" and smaller chisels have 30° primary bevel angles, others are 25°
  • All have 2° micro-bevels, require only final honing before use
  • Made in Canada

Veritas PM-V11 Bench Chisel, 1/4 inch

Veritas PM-V11 Bench Chisel, 1/4 inch

Veritas PM-V11 Bench Chisel, 1/4 inch (A) These chisels are among the first edge tools milled fr..

1,063.75kr (SEK) Ex Tax: 851.00kr (SEK)

Veritas PM-V11 Bench Chisel, 3/8 inch

Veritas PM-V11 Bench Chisel, 3/8 inch

Veritas PM-V11 Bench Chisel, 3/8 inch (B) These chisels are among the first edge tools milled fr..

1,063.75kr (SEK) Ex Tax: 851.00kr (SEK)

Veritas PM-V11 Bench Chisel, 1/2 inch

Veritas PM-V11 Bench Chisel, 1/2 inch

Veritas PM-V11 Bench Chisel, 1/2 inch (C) These chisels are among the first edge tools milled fr..

1,115.00kr (SEK) Ex Tax: 892.00kr (SEK)

Veritas PM-V11 Bench Chisel, 3/16 inch

Veritas PM-V11 Bench Chisel, 3/16 inch

Veritas PM-V11 Bench Chisel, 1/2 inch (C) These chisels are among the first edge tools milled fr..

1,001.25kr (SEK) Ex Tax: 801.00kr (SEK)

Veritas PM-V11 Bench Chisel, 3/4 inch

Veritas PM-V11 Bench Chisel, 3/4 inch

Veritas PM-V11 Bench Chisel, 3/4 inch (D) These chisels are among the first edge tools milled fr..

1,220.00kr (SEK) Ex Tax: 976.00kr (SEK)

Veritas PM-V11 Bench Chisel, 1 inch

Veritas PM-V11 Bench Chisel, 1 inch

Veritas PM-V11 Bench Chisel, 1 inch (D) These chisels are among the first edge tools milled from..

1,272.50kr (SEK) Ex Tax: 1,018.00kr (SEK)

Veritas PM-V11 Bench Chisel, 1/8 inch

Veritas PM-V11 Bench Chisel, 1/8 inch

Veritas PM-V11 Bench Chisel, 1/8 inch (D) These chisels are among the first edge tools milled fro..

1,001.25kr (SEK) Ex Tax: 801.00kr (SEK)

Showing 1 to 7 of 7 (1 Pages)