Our large shoulder plane is really a specialized rabbet plane for trimming tenons and shoulders or paring down tenon cheeks.
Plane has a comfortable lever cap that fits properly in the palm and incorporates a bubinga lever cap knob that pivots 180°.
A multi-positional front knob can be mounted on the top or on either side.
Recesses are cast into the side of the plane to provide additional gripping surface.
Adjustable toe allows the mouth to be narrowed for very fine shavings and minimum tear-out.
Set screws along the side allow for accurate positioning of the blade as well as reinstallation without lateral adjustment.
A low bed angle of 15°, combined with a 25° blade bevel, results in a cutting angle of 40° for exceptional end-grain performance.
Blade is 1/8" thick, made of either A2 or O1 tool steel. It is lapped on the non-bevel side to a flatness tolerance of 0.0002" or better over the working surface, and with an average roughness surface finish of 5 microinches (0.000005") or better.
Stress-relieved ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square.
8-1/4" long by 1-1/4" wide.
Weighs 3-3/4 lb.
Patented.

Instruktion

Write a review

Note: HTML is not translated!
    Bad           Good

Large Shoulder Plane PM-V11

  • Brand: Veritas tools
  • Product Code: 05P43.71
  • Availability: Out of stock
  • 2,538.75kr (SEK)

  • Ex Tax: 2,031.00kr (SEK)

Tags: Large Shoulder Plane PM-V11, 05P43.71, Shoulderplanes